Tennsco B-53 Welded Bookcase 34.5"W x 13.5"D x 52"H Inches -B-53

Both highly functional and extremely efficient, Tennsco's welded B-53 bookcase provides the perfect storage solution for any environment. With its heavy-duty frame, it is ideal for all homes and workspace. It comes fabricated of high quality, cold-rolled carbon steel, free of scale or rust, and fully pickled. Exposed edges, corners, and surface areas are free of sharp edges

13.5" Deep Welded Bookcase - 52" High - B-53 features:

• Welded for Durability: Spot welded for maximum strength and rigidity, providing years of heavy use.
• Maximum Rigidity: Shelves have multiple bends at the front for additional strength.
• Smooth, Clean Lines: Welded construction requires no fasteners, providing a clean professional appearance. Unit tops have no overhang, so side-to-side units will fit flush together.
• Adjustable Shelves: Shelves adjust vertically without tools in 2 5 / 64 " increments. A narrow profile is ideal for books and standard sized binders.
• Raised Bottom: Has a 1 1 / 2 " raised base which keeps materials safe from damaging cleaners.
• Integrated Shelf Support Tabs: Built-in shelf support tabs mean no clips to lose and documents will not slip through cracks.
•  Shelf Capacity: 13 1 / 2 " shelf supports up to 130 lbs. per shelf.
• Materials: Welded Bookcases as well as all Tennsco products are fabricated of high quality, cold-rolled carbon steel, free of scale or rust, and fully pickled. Exposed edges, corners, and surface areas are free of sharp edges and all workmanship is of the highest quality as measured by the industry.
• Finish: All steel components shall be thoroughly cleaned and phosphatized for rust resistance in a five-stage pre-treatment process. A high grade of polyester/epoxy powder paint is to be applied electrostatically with a gloss reading of between 55 and 65. The finish shall have a salt spray rating of 250 hours or more.
• Sides: Sides are formed from 22 gauge steel. Sides have a 7 / 8 ” 990-degreeflange on the back and a 1” x 7 / 16 ” channel on the front. Sides have two welded strips of dog ear lances to secure the shelves and allow shelf adjustability on 2 5 / 64 ” centers. Every third dog ear is shaped differently to make installation and lineup of shelves easier.
• Back: Backs are formed using 22 gauge steel. Back is inserted to a fixture and resistance welded to the inside flange of sides, top and bottom of units for strength and durability.
• Top: Tops are formed using 22 gauge steel and have 1 11 / 16 ” box formation on front and 1 1 / 32 ” 90-degree flange on the back and sides. The top has the manufacturer’s nameplate on the front of the box formation.
• Bottom: Bottoms are formed using 22 gauge steel and have 1 11 / 16 ” box formation on front and 1 1 / 32 ” 90-degree flange on the back and sides. The bottom has four 1 / 2 ” diameter. Plastic feet supply stability.
• Shelves: Shelves are formed using 20 gauge steel and have a 3 / 4 ” 90-degree flange on both ends. The front of the shelf has a 3 / 4 ” box formation for added strength and the back is a 3 / 4 ” x 1 / 2 ” channel formation. The shelf hooks into the dog ear lances on the sides and are adjustable on 2” centers.
• Brand: Tennsco
• Manufacturer: Tennsco
• Model: B-53
• Manufacturer Part Number: B-53